# Select Printer

# Updated:  30.07.2019

> [HTML Version](select-printer.htm)



**1. Select the menu item > Basic settings < in the main menu under > Configuration <**.





**(grundeinstellungen_menue_en.png)**







**2. Select the tab > Printer <**.



Now the list of installed printers appears, which is empty at the beginning.

By clicking on the button > Add Printer < in the window at the bottom left you get to the input mask for the printer data under the tab > Printer Details< .





**(drucker_hinzufuegen_en.png)**





**3. Select Printer Brand**



By clicking on the roll-down arrow, a list of possible printer manufacturers appears in the line > Printer mark <.

Use the cursor to select the suitable printer for your printer, for example TSC.



**(drucker_hersteller_auswaehlen_en.png)**



****

**4. Select printer model**



By clicking on the roll-down arrow, a list of possible printer models of the selected manufacturer appears in the line > Printer model <.

Use the cursor to select the suitable printer for your printer, here TA310 as an example.

In the window below you will see a picture of the selected model.



**(drucker_modell_en.png)         (drucker_modell_bild_en.png)**





**5. Select printer driver**  
****

By clicking on the roll-down arrow, a list of possible printer drivers for the selected model appears in the line > Printer driver <.

Here you should also find the printer driver that you previously downloaded under >first steps< according to the information in FAQ-online on our website** www.extra4.com** in the Support section for your printer.

Select this printer driver with the cursor.



**(drucker_treiber_en.png)net**





**6. Determine printer location**  
****

If you have several printers in use, it is advisable to make the printers distinguishable by specifying their location.

Use the keyboard to enter the location of your printer, e.g. "Office".



**(drucker_standort_en.png)**

  


**7. Save new printer**  
****

By clicking on the button > Save new printer < the printer appears in the printer lis.



**(drucker_speichern_en.png) (drucker_liste_en.png)**

****

**8. Complete the process**  
****

Finish adding a printer by clicking the > Close < button in the upper right corner.







**9. Next step:**



Select the **[layou](select-label-layout.md)t** that matches the printer and your label.